Rebar Inspections
Signed Off Without Looking
The Challenge
Drive-by inspections are the norm
34% of rebar inspections take less than 5 minutes. The inspector checks the general layout but does not verify specific spacing, coverage, lap lengths, or embed locations.
Spacing and coverage not measured
Rebar spacing should be verified with a tape measure at multiple locations. Most inspectors eyeball it. When specs call for 6-inch spacing, actual spacing varies from 4 to 9 inches.
Inspection reports are generic
The inspection form says rebar placed per plans. It does not document what was actually checked, measured, or verified. It is a liability shield, not a quality record.
Embeds and blockouts missed
Anchor bolts, sleeves, and blockouts need to be in the right location before the pour. Inspectors check rebar but miss embedded items that are equally critical.
The POD Advantage
Photo-documented inspections
Photograph the rebar mat from multiple angles. POD links photos to the inspection record with location, time, and inspector identification.
Measurement verification
Voice-log actual measurements: bar spacing at 3 locations, concrete coverage, lap lengths. POD compares against specification requirements.
Embed and blockout checklist
Every embed, anchor bolt, and blockout verified against the placement drawing. Check each item as verified, not a blanket approval.
Pre-pour hold point
POD creates a digital hold point. Concrete cannot be called until the rebar inspection is complete and all items are verified.
Structural Quality Intelligence
“Post-pour GPR scan found missing rebar in 3 locations the inspector had approved. $250K in remediation. POD photo inspections would have documented actual coverage before the pour.”
— QC Director, Structural Concrete Contractor
Your Competitors Track Safety Like This
POD tracks hundreds of KPIs from a 5-minute voice report. Here are just 2 of them.
Experience Modification Rate
Training Compliance
These update in real time from a 5-minute voice report. No spreadsheets. No data entry.
Frequently Asked Questions
Make Rebar Inspections Actually Inspect
See how POD turns rubber-stamp approvals into verified structural quality records.