Electrical Contractors

Electrical Contractors Write
The Same Daily Log Every Day

0
Min Writing Daily Log
0%
% Logs Missing Wire Counts
0
Avg Daily Entries Per EC
0
Min With POD

The Challenge

01

Too much detail to capture on paper

Electrical work involves circuit numbers, wire sizes, conduit runs, device counts, panel connections, and testing results. Paper forms have room for maybe 3 lines of notes.

02

JW-level work documented by apprentices

The journeyman does the work. The apprentice writes the daily. Half the detail is lost because the apprentice does not know which circuits were completed or what testing was done.

03

Change order backup is missing

You pulled 400 extra feet of MC cable because the architect moved 6 outlets. Without daily documentation of the extra work, your change order has no backup.

04

Panel schedule updates lag behind installation

The as-built panel schedule should reflect what is actually connected. But paper dailies do not track panel connections, so the schedule is always 2 weeks behind reality.

The POD Advantage

Voice-captured electrical logs

Full detail captured

Speak naturally: we pulled 200 feet of 12-3 MC to the second floor, roughed in 14 duplex receptacles, and terminated 6 circuits in panel 2A. POD understands all of it.

Circuit and device tracking

Real-time as-builts

POD tracks circuits completed, devices installed, wire pulled, and panels terminated. Your daily log becomes a real-time as-built record.

Automatic T&M backup

Change orders supported

Extra work documented in real time with labor hours, material quantities, and the reason for the change. Change order backup writes itself.

Production tracking dashboard

Productivity visibility

Devices per day, wire feet per crew, rough-in completion by floor. See your production rates and compare against the estimate.

Built for Electrical Contractors

“My electricians spend more time documenting than installing. With POD they speak their daily log while cleaning up and it captures every circuit, every pull, every device count automatically.”

— Project Manager, Commercial Electrical Contractor

Live Demo

Industry-Specific KPIs That Update Themselves

POD tracks hundreds of KPIs from a 5-minute voice report. Here are just 2 of them.

Safety Dashboard

Safety Performance

0Strong
0Days Safe
Goal: 200 days0%
Day 0 / 3650%
0 reset since start
Hours Worked0K
Recordables0
Near Misses
0reported
First Aid0
TRIR
Good
0.00per 200K hrs
Best-in-classAvg: 3.1
DART
Good
0.00per 200K hrs
Best-in-classAvg: 1.5
PODDual EVM Gauge

Earned Value Performance

Cost Performance
0.71.3
0.70
Performance
Critical
0.49CPI × SPI
Schedule Performance
0.71.3
0.70
Performance
Critical

Both cost and schedule under pressure

CPI
0.70
SPI
0.70
Cost Var-30.0%
Sched Var-30.0%
Composite0.490
EAC Factor1.429
BudgetOver Budget
ScheduleBehind
HealthAction Needed

These update in real time from a 5-minute voice report. No spreadsheets. No data entry.

Frequently Asked Questions

Daily Logs That Speak Electrician

See how POD captures electrical daily reports in 5 minutes flat.

Last updated: February 2026