Air Monitoring

Air Monitoring During Remediation
Cannot Have Gaps

0
Readings Per Shift Minimum
0%
% Logs With Monitoring Gaps
0
Min Intervals Required
0
Min Per Reading With POD

The Challenge

01

15-minute intervals are hard to maintain

The HASP requires air monitoring every 15 minutes during active excavation. But the technician is also managing the excavation, directing traffic, and coordinating with the lab. Readings get missed.

02

Paper logs are filled in after the fact

The technician takes readings all day and writes them down when they remember. By end of shift, the 3 PM through 4 PM readings are estimated because nobody wrote them down at the time.

03

Action level exceedances are not flagged

A PID reading hits 25 ppm which triggers engineering controls per the HASP. But on paper, nobody notices until the PM reviews the logs hours later. Workers continued without protection.

04

Perimeter monitoring is inconsistent

Perimeter air monitors protect the surrounding community. But walking the perimeter every 15 minutes means some stations get checked and others get skipped when the technician is busy elsewhere.

The POD Advantage

Automated monitoring reminders

Zero monitoring gaps

POD sends alerts every 15 minutes when monitoring is required. The technician speaks the reading and location. Missed readings are flagged immediately, not discovered hours later.

Voice-captured readings

10-second documentation

Speak the instrument reading, location, and wind direction in 10 seconds. POD timestamps the reading and adds it to the monitoring log. No paper, no delays, no estimates.

Real-time action level alerts

Instant exceedance response

When any reading exceeds an action level, POD immediately alerts the site safety officer and specifies the required response per the HASP. No more delayed responses to exceedances.

Station tracking and coverage

Full station coverage

POD tracks which monitoring stations have been checked and which are overdue. The technician sees a map of stations with green for current and red for overdue.

Built for Air Monitoring Programs

“The health department shut us down for 3 days because our air monitoring logs had a 2-hour gap during active excavation. With POD the monitoring reminders go off every 15 minutes and every reading is time-stamped.”

— Health and Safety Officer, Environmental Contractor

Live Demo

Industry-Specific KPIs That Update Themselves

POD tracks hundreds of KPIs from a 5-minute voice report. Here are just 2 of them.

Safety Dashboard

Safety Performance

0Strong
0Days Safe
Goal: 200 days0%
Day 0 / 3650%
0 reset since start
Hours Worked0K
Recordables0
Near Misses
0reported
First Aid0
TRIR
Good
0.00per 200K hrs
Best-in-classAvg: 3.1
DART
Good
0.00per 200K hrs
Best-in-classAvg: 1.5
PODDual EVM Gauge

Earned Value Performance

Cost Performance
0.71.3
0.70
Performance
Critical
0.49CPI × SPI
Schedule Performance
0.71.3
0.70
Performance
Critical

Both cost and schedule under pressure

CPI
0.70
SPI
0.70
Cost Var-30.0%
Sched Var-30.0%
Composite0.490
EAC Factor1.429
BudgetOver Budget
ScheduleBehind
HealthAction Needed

These update in real time from a 5-minute voice report. No spreadsheets. No data entry.

Frequently Asked Questions

Close Every Air Monitoring Gap

See how POD ensures continuous air monitoring documentation during remediation.

Last updated: February 2026