Structural Monitoring

Stadium Long-Span Structures Deflect
Up to 6 Inches Under Load

0
Ft Avg Long-Span Truss
0K
K Bolts Per Major Stadium
0%
% Monitoring Gaps on Paper
0
Min With POD

The Challenge

01

Deflection readings recorded but not compared to limits

Survey crews measure truss deflections, column plumbness, and bearing pad alignment. Paper field books capture numbers but nobody compares them to the structural engineers allowable limits until the weekly meeting.

02

Bolt torque records disconnected from locations

A 50,000-seat stadium has over 47,000 structural bolts. Paper torque logs record values but matching a torque reading to a specific connection on a 300-foot truss requires cross-referencing drawings nobody has in the field.

03

Post-tensioning sequences not verified in real time

Concrete bowl structures use post-tensioned cables that must be stressed in a specific sequence. Paper logs capture jack pressures and elongations but cannot verify the sequence was followed correctly until after the fact.

04

Retractable roof mechanism alignment tracked manually

Retractable roof systems have rail alignments, motor synchronization, and weather seal tolerances measured during commissioning. Paper punch lists cannot track the hundreds of adjustment points across a 600-foot span.

The POD Advantage

Voice-logged survey readings with limit checks

Instant tolerance alerts

Speak deflection readings, plumbness measurements, and bearing alignments as you survey. POD compares every reading against structural engineering tolerances and flags exceedances immediately.

Bolt torque mapped to connections

Connection-level traceability

Every torque value GPS-tagged and linked to the specific structural connection on the 3D model. Full traceability from bolt to beam to truss to roof system.

Post-tensioning sequence verification

Sequence-verified records

Stressing sequence tracked in real time against the engineers required order. POD prevents out-of-sequence stressing by alerting when the next cable does not match the plan.

Retractable system commissioning tracker

System readiness dashboard

Every rail alignment point, motor test, and seal measurement tracked through commissioning. POD shows system readiness as a percentage with every deficiency itemized.

Structural Monitoring Intelligence

“We had a 340-foot roof truss deflecting beyond tolerance during a concrete pour on the concourse below. The survey crew measured it but the reading sat in a field book for two days. POD would have flagged that deflection in real time.”

— Structural Superintendent, Major Venue Contractor

Live Demo

Industry-Specific KPIs That Update Themselves

POD tracks hundreds of KPIs from a 5-minute voice report. Here are just 2 of them.

Safety Dashboard

Safety Performance

0Strong
0Days Safe
Goal: 200 days0%
Day 0 / 3650%
0 reset since start
Hours Worked0K
Recordables0
Near Misses
0reported
First Aid0
TRIR
Good
0.00per 200K hrs
Best-in-classAvg: 3.1
DART
Good
0.00per 200K hrs
Best-in-classAvg: 1.5
PODDual EVM Gauge

Earned Value Performance

Cost Performance
0.71.3
0.70
Performance
Critical
0.49CPI × SPI
Schedule Performance
0.71.3
0.70
Performance
Critical

Both cost and schedule under pressure

CPI
0.70
SPI
0.70
Cost Var-30.0%
Sched Var-30.0%
Composite0.490
EAC Factor1.429
BudgetOver Budget
ScheduleBehind
HealthAction Needed

These update in real time from a 5-minute voice report. No spreadsheets. No data entry.

Frequently Asked Questions

Monitor Stadium Structures in Real Time

See how POD turns structural field data into engineering-grade monitoring for long-span construction.

Last updated: February 2026