Every Sanitary Weld.
On the record.
3A dairy-standard weld x-rays, CIP circuit testing, and vessel slope verification — the TTB inspector asks for weld records on the fermenter drain valve. You have nothing. POD changes that.
What Your Brewery Daily Report Is Missing
Sanitary piping, CIP validation, and vessel placement are the three most critical scopes in brewery construction — and the three least documented.
Sanitary weld x-ray documentation scattered across subcontractors
Each sanitary weld requires x-ray documentation, surface finish verification to 3A dairy standards, and passivation records. The piping sub has some records, the x-ray vendor has others, and the daily report references none of them.
CIP circuit validation lost between trades
Clean-in-place circuits connect vessels, heat exchangers, and piping across the entire brewhouse. Validation requires flow rates, chemical concentrations, and temperature profiles per circuit — documented as a system, not per individual trade.
Vessel slope and drain verification not in daily reports
Brewery vessels require precise slope to drain points for CIP effectiveness. Installation slope measurements are taken during placement but never appear in the daily construction report. When CIP fails, there’s no record of as-installed slopes.
Equipment rigging and placement sequence undocumented
Mash tun, brew kettle, fermenters, and bright tanks must be placed in a specific sequence before piping connections. The rigging plan says “fermenter installed Thursday” — but which one? Was it level? Was the anchor bolt pattern verified?
How POD Fixes Brewery Construction Reporting
Voice-capture weld data at each sanitary connection
Speak the weld ID, x-ray result, surface finish measurement, and passivation status at each joint. POD builds the complete sanitary weld register from daily reports.
CIP circuit validation documented end-to-end
Flow rates, chemical concentrations, and temperature profiles captured through voice. POD tracks each CIP circuit as a complete system across all connected vessels and piping.
Vessel slope documentation during installation
Slope measurements, drain point locations, and level verification captured at the moment of vessel placement. POD creates the as-installed slope record that CIP commissioning needs.
Rigging sequence and placement verification
Each vessel placement documented with: vessel ID, date, time, level verification, anchor bolt torque values, and position relative to adjacent equipment. POD’s timeline shows the exact installation sequence.
Your Brewery Floor Plan — Every Vessel Tracked
POD documents every equipment installation, sanitary weld, and CIP circuit from grain silo to bright tank.
Brewery Build Metrics — From Mash Tun to First Pour
Just-in-time equipment delivery tracking and rework velocity for sanitary piping — computed from your daily voice report.
Just-In-Time Score
PODDelivery timing
Score detail
Rework Velocity
Resolution trend
Resolve rate
Defect flow
Built for Brewery & Distillery Construction
Sanitary Weld Registry
X-ray documentation, surface finish measurements, and passivation records for every 3A dairy-standard weld — tracked per joint
CIP System Validation
Flow rate, chemical concentration, and temperature profile documentation for every clean-in-place circuit across all connected vessels
Vessel Installation Dashboard
Rigging sequence, slope verification, anchor bolt torque, and placement documentation for every vessel from mash tun to bright tank
The POD Difference
POD captures the detail that matters in process facility work, weld by weld and system by system, so the daily report reflects what was actually built instead of a one-line summary.
Frequently Asked Questions
Document Every Sanitary Weld, Every CIP Circuit, Every Vessel
See how POD turns a 5-minute voice report into complete brewery construction documentation — from mash tun to bright tank.
Last updated: April 2026