RenewableOperations & Maintenanceon the Record
The build is done. Now availability is the revenue and the weather decides when a fault gets fixed. POD puts the operating day on the record for solar, storage, and wind, from a voice note at the site to the owner's fleet dashboard.
A running plant reports nothing like a build, and each technology reports differently
A solar operator reads performance ratio and soiling. A wind operator reads availability and capacity factor. A storage operator reads state of health and round-trip efficiency. A generic maintenance log captures the work order and drops the day around it — the production lost, the window that gated the repair, the units trending toward failure. POD gives every operating technology the O&M report it actually needs, and rolls them into one fleet view.
The O&M paths POD covers
Every renewable technology reports its running plant differently — POD speaks all of them.
Solar PV O&M
Performance ratio, soiling loss, inverter and string faults, production vs P50.
LiveGrid BESS O&M
State of health, round-trip efficiency, cycles run, auxiliary load, thermal events.
LiveSolar + Storage O&M
Co-located PV and storage dispatch, availability, one interconnection to watch.
LiveOnshore Wind O&M
Fleet availability, capacity factor, drivetrain faults, work-order backlog.
LiveOffshore Wind O&M
Availability, vessel access, weather windows, faults, mean-time-to-repair.
LiveBuilding or repowering?
Construction and Repower live on the main Renewable Energy hub — same platform, same login.
Renewable Energy hubSolar PV, Grid Storage (BESS), Solar + Storage, Onshore Wind, and Offshore Wind O&M are live now — the operating side of every renewable POD builds.
Built for the operating plant, not the build
Availability is the revenue
Every idle hour is production that never reaches the grid. POD puts availability, capacity factor, and production-versus-plan on the daily record the asset manager and the lender read first.
The weather gate, logged
Access is the constraint — a wind window offshore, irradiance onshore. POD records the window that opened or closed and the repair it gated, so a slow week reads as weather, not neglect.
Beside your CMMS, not replacing it
POD is the reporting and intelligence layer over the operating day. It reads the files you already keep and turns faults, work orders, and hours into the report a CMMS was never built to produce.
One asset, its whole life
The same platform followed the site through construction and repower. O&M is the long chapter — decades of operation on the same login, not a new tool.
Every plant, one fleet
Solar farm, wind farm, storage site — each operating plant streams its availability and production into one fleet view an owner or asset manager reads at a glance.
The operating fleet on the dashboard
Two numbers a renewable operator reads first: is the fleet available, and is any plant slipping below plan.
Fleet Health Index
PODHealth radar
Health pillars
Composite
Anomaly Detector: Production vs P50 (%)
PODControl chart
Recent anomalies
Detection stats
Illustrative operating data. POD builds these from the O&M report you file — the metrics your fleet actually captures.
Built for the operating day, not a generic maintenance log
| What gets tracked | Generic CMMS log | POD renewable O&M |
|---|---|---|
| Work order closed | Plus MWh lost while the asset was down | |
| Weather note | The window that opened or closed, and the repair it gated | |
| Equipment | Which units produced, were curtailed, or were on fault | |
| Production vs plan | MWh against P50, capacity factor, curtailment by cause | |
| Fleet availability & reliability | Availability, MTTR, and the units trending toward failure | |
| One portfolio across technologies | Solar, storage, and wind, running, on one fleet view |
Free renewable O&M templates & KPI tools
Grab a free daily O&M report template for your technology, or use POD's free KPI calculators — Google Sheets, Excel, or PDF. No account needed.
Renewable O&M reporting questions
A renewable O&M report is the daily operating record of a running plant: production against the P50 forecast, availability and capacity factor, faults raised and work orders closed, technician hours, and the weather window that gated access. It is the record an asset manager, a lender, and the OEM warranty team all read — and it looks different for solar, storage, and wind.
Put the operating day on the record
Pick your technology and see the O&M report your fleet actually needs.
Last updated: July 2026